Unlock a DIMM slot by pressing the retaining clips outward. Call the drive manufacturers for compatibility with other drives. Pop up the following dialog. The information will be refreshed every 1 second. Reformat the hard drive. Before you start installing the motherboard, please make sure you follow the instructions below: Hold the CPU down firmly, and then lower the lever to locked position to complete the installation.

Uploader: Samule
Date Added: 6 June 2016
File Size: 63.44 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 52782
Price: Free* [*Free Regsitration Required]

The BIOS has been recovered and will work properly. When connecting with wires onto connectors, please note that the red wire is the positive and should be connected to pin 2, and the black wire is Ground and should be connected to GND.

Remove AC power line. Clear the CMOS data.

Biostar 945P-A7A Setup Manual: Front Panel Audio Header; Cd-rom Audio-in Connector

If the following message is shown after boot-up the system, it means the BIOS contents are corrupted. Plug in the power cord and boot up the system.

Execute the setup execution file, and then the following dialog will pop up. Headers for USB 2.

Biostar P-A7A – – motherboard – ATX – LGA Socket – iP Overview – CNET

Power on the system again. Pop up the following dialog. Hard disk can be read and applications can be used but booting from hard disk 2. Reformat the hard drive. Look for the triangular cut edge on socket, and the golden dot on CPU should point forwards this triangular cut edge.


Table of Contents Chapter 1: Let user select a restoring way if system need to do a fail-safe reboot. Keyboard lights are on, power indicator lights are lit, and hard drive is spinning. The CPU will fit only in the correct orientation. Whenever the Tray Icon utility is launched, it will display a little tray icon on the right side of Windows Taskbar.

It’s a community-based project which helps to repair anything. System will boot-up to DOS prompt. Auduo the testing is ok, then the current frequency will be saved into system registry.

The cool Hardware Monitor smartly indicates the temperatures, voltage 9455p-a7a CPU fan speed as well as the chipset information. You will need Acrobat Reader to open the manual file.

The setup guide will list the software available for your system, click on each software title to launch the installation program. When the CPU is over heated, the motherboard will shutdown automatically to avoid a damage of the CPU, and the system may not power on again.


All aucio brand and product names are trademarks of their respective companies.

EXE under sudio optical drive. After confirmed, please follow steps below to relief the CPU protection function.

Remove Pin Cap before installation, and make good preservation for future use.

Biostar P-A7A Owner’s Manual – Page 1 of 88 |

Click on the Manual icon to browse for available manual. In this panel, you can get the real-time status information of your system. This completes the installation. The setup guide will list the compatible driver for your motherboard and operating system. Cannot boot system after installing second hard drive. CPU Overheated If the system shutdown automatically after power on system for seconds, 945p-a77a means the CPU protection function has been activated.

Hold the board on the edge, do not try to bend or flex the board. Voltage Panel Click the Voltage button in Main Panel, the button will be highlighted and the Voltage Panel will slide out to 945p-q7a as the following figure.